Important Usage Instructions:
- Please shake several times before use. Hold the nozzle at a 45° to 60° angle to the board, 10-14 inches away, and gently press the nozzle to ensure the spray evenly covers the board.
- Spraying twice will be more even.
- The spray will dry in 5 minutes. Once the spray has dried, you can perform inkjet printing on the M1 Ultra and M2.
Wood printing fixative spray is applied to the surface of the wood and then combined with M1 Ultra, which enhances print quality by achieving higher color saturation and preventing patterns from bleeding. Please note that the spray is initially clear in color.
Spray area: Can be used to spray 6-12 pieces of 12 "x 12" plywood (1 coat=12 pieces, 2 coats=6 pieces).
This clear, fast-drying fixative helps improve color saturation and reduce ink bleeding when printing on compatible wood surfaces.
Please note that the spray should be stored at a temperature of 113°F or below. Ensure proper ventilation, keep it away from direct sunlight and open flames, and keep it out of reach of children.
Main Ingredients: Ethanol, propane/butane propellant, polyvinylpyrrolidone, fragrance, and functional additives.
Safety Notice: Flammable aerosol. Use in a well-ventilated area. Keep away from heat, sparks, open flames, and direct sunlight. Avoid breathing spray mist. Keep out of reach of children.

M2 primer & spray